Comtrol AT Commands for SmartACFL Manuel d'utilisateur télécharger pdf (Page 82)

Command Reference Manual

3-62

Conexant

100722A

3.2.10 Compatibility Commands

3.2.10.1 &L - Leased Line Operation

This command requests leased line or dial-up operation. This command is provided for compatibility only; no mode change is

performed, dial-up operation continues. The OK response is returned for a valid parameter, but no other action is performed.

The parameter value, if valid, is written to S27 bit 2.

Syntax

&L<value>

Defined Values

<value> Decimal number corresponding to the selected option.

0 Requests dial-up operation. Dial-up operation continues.

Result Codes

OK 0.

ERROR Otherwise.

3.2.10.2 )M - Enable Cellular Power Level Adjustment

This command is included for compatibility only and has no effect other than returning a result code.

Syntax

)M<value>

Defined Values

<value> Decimal number corresponding to the selected option.

0 )M0 command.

1 )M1 command.

2 )M2 command.

Result Codes

OK 0 to 2.

ERROR Otherwise.

3.2.10.3 @M - Initial Cellular Power Level Setting

This command is included for compatibility only and has no effect other than returning a result code.

Syntax

@M<value>

Defined Values

<value> Decimal number corresponding to the selected power setting.

0 @M0 command.

30 @M30 command.

Result Codes

OK 0 to 30.

ERROR Otherwise.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 171 172

Pas de commentaire

Comtrol AT Commands for SmartACFL Manuel d'utilisateur Page 82