Comtrol AT Commands for SmartACFL Manuel d'utilisateur télécharger pdf (Page 162)

Command Reference Manual

6-18

Conexant

100722A

6.2.2.15 +VDT - Control Tone Cadence Reporting***

This command is included for compatibility only and has no effect other than returning a result code.

This command allows the modem to enable or disable reporting of the control tone cadence information in the frequency band

used by the Ringback/Remote Ring, BUSY, and reorder/Fast Busy tones (usually in the 300 to 600 Hz range).

Syntax

+VDT=<enable>,<report>

Defined Values

<enable> Decimal number corresponding to the selected option.

0 The modem will not produce any control tone cadence report.

<report> Decimal number specifying the produced any control tone cadence report when enabled by the

<enable> subparameter.

0 The modem will produce only CPOF and CPON messages.

Other Reserved.

Reporting Current or Selected Values

Command: +VDT?

Response: <enable>,<report>

Example: 0,0 For the default setting.

Reporting Supported Range of Parameter Values

Command: +VDT=?

Response: (<enable> range),(<report> range)

Example: (0),(0)

Result Codes

OK <enable>,<report> = (0),(0)

ERROR Otherwise, or if not in Voice Mode.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 171 172

Pas de commentaire

Comtrol AT Commands for SmartACFL Manuel d'utilisateur Page 162